We manufacture DN125 double wall pipes with inner layer in heat treated wear resistant steel. The Zenit collars reinforced with High Crome alloy inserts are welded with a special cooling process that maintains the characteristics of alloy and hardness unchanged. The main characteristics that distinguish our Zenit pipes are:
- maximum resistance to wear
- maximum duration of the collars
- pipes of various lengths on request
- reduction of machine downtime
- reliability
BOOM PIPE
ZENIT
- Pipe DN125 collars 5″1/2 SK
- Wall Thickness: 4,0 mm (2,0+2,0) alternatively 4,5mm (2,5+2,0)
- Material: double layer
- Hardeness: > 63 HRC (Rockwell)
- Lenght: from 100 mm to 6000 mm
- Working Pressure: 85 bar
- Service Life Factor*: 5
*Compared with commonly available S355JR (ST52).
DECK PIPE
ZENIT H – Hard
- Pipe DN125 collars 5″1/2 SK thickness 8,6 mm (5,6+3,0)
- Material: double layer
- Hardeness: > 67 HRC (Rockwell)
- Lenght: from 100 mm to 6000 mm
- Working Pressure: 85 bar
- Service Life Factor*: 10
*Compared with commonly available S355JR (ST52).
BENDS
ZENIT L – Light
- Bend DN100 collars 4″1/2 SK
- Bend DN125 collars 5″1/2 SK
- Diversified Wall: greatest thickness* up to 13 mm
- Angle: from 30° to 90°
- Collars: double wall with chrome carbide inserts, hardeness 63 HRC (Rockwell)
- Working Pressure: 85 bar
* The wall thicknesses depend on the geometry and can vary depending on the dimensions and angles.
ZENIT
- Bend DN100 collars 4″1/2 SK
- Bend DN125 collars 5″1/2 SK
- Diversified Inner Wall: greatest thickness* up to 12 mm
- External Wall Thickness*: 4 mm
- Angle: from 30° to 90°
- Material: double layer
- Hardeness: > 63 HRC (Rockwell)
- Working Pressure: 85 bar
- Service Life Factor**: 5
* The wall thicknesses depend on the geometry and can vary depending on the dimensions and angles.
** Compared with commonly available S355JR (ST52).
ZENIT H – Hard
- Bend DN125 collars 5″1/2 SK
- Diversified Inner Wall: greatest thickness* up to 20 mm
- External Wall Thickness*: 4 mm
- Angle: 90°
- Material: double layer
- Hardeness: > 67 HRC (Rockwell)
- Working Pressure: 85 bar
- Service Life Factor**: 10
* The wall thicknesses depend on the geometry and can vary depending on the dimensions and angles.
** Compared with commonly available S355JR (ST52).
REDUCER
- from DN125 to DN100 collars 5″1/2 SK – 4″1/2 SK
- from DN125 to DN112 collars 5″1/2 SK – 5″1/2 SK
- from DN125 to DN117 collars 5″1/2 SK – 5″1/2 SK
- from DN150 to DN125 collars 6″ SK – 5″1/2 SK
- Wall Thickness: 8,0 mm (4,0 + 4,0)
- Material: double layer
- Hardness: > 63 HRC (Rockwell)
- Lenght: < 500 mm
- Working Pressure: 85 bar
- Service Life Factor*: 5
*Compared with commonly available S355JR (ST52) pipes.
WEAR RESISTANCE DATA SHEET
